StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

The Stress Strain Curve - Essay Example

Cite this document
Summary
This paper 'The Stress Strain Curve' tells us that proportional limit is the stress experienced on the stress strain curve, which is the point where the curve moves away from the straight line. In most instances, the material is mostly elastic at this point. On the other hand, the elastic limit represents the apparent stress…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER97.7% of users find it useful
The Stress Strain Curve
Read Text Preview

Extract of sample "The Stress Strain Curve"

From the equation 2-5   G= E/ [2+V] = (114GPa)/ [2/ (1+0.33)]

                                                G= 42.9 GPa

  1. A material with a hardness of HB 750 is classified as extremely hard, which is a feature

        of the hardest steels when the condition is surface hardened. Annealed steels have        

        hardness values that range from HB 120 to HB 230.

  1. High carbon – 0.5% to 0.95%

         Medium carbon- 0.30% to 0.505

         Low –carbon- It is less than 0.3%

  1. To improve machinability, lead is incorporated into the AISI 12L.
  2. In most instances, when a material has good ductility and high hardness, it is deemed suitable for tools and parts of the machine that are about impact loads. A material with a hardness of HRC 40 equals around HB 375, which is considered moderately hard. Even though this level of hardness is considered suitable, a hardness value of HRC 50 or HB 475 is better when the ductility level is also high which represents about 15% elongation. Appendix 3, reveals forms of AISI 1040 and others that are non-listed and oil quenched, and they are listed as having adequate hardness levels. Appendix 4-1 indicates the same material that is tempered and quenched in water. The AISI 1040 WQT 700 possesses a hardness of HRC 43 (HB 401), a yield point of 92ksi, and an elongation percentage of 20.
  3. To obtain a suitable hardened condition, the whole part is heated and then quenched. The part is hardened the entire time but differs in thick sections. However, no chemical constituent changes are experienced. During the carburizing process, the chemical structure of the surface is altered through carbon infusion. Therefore, the process of carburizing makes the outer surface harder while the inner surface becomes softer.
Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“MET Essay Example | Topics and Well Written Essays - 250 words - 1”, n.d.)
MET Essay Example | Topics and Well Written Essays - 250 words - 1. Retrieved from https://studentshare.org/systems-science/1676631-met
(MET Essay Example | Topics and Well Written Essays - 250 Words - 1)
MET Essay Example | Topics and Well Written Essays - 250 Words - 1. https://studentshare.org/systems-science/1676631-met.
“MET Essay Example | Topics and Well Written Essays - 250 Words - 1”, n.d. https://studentshare.org/systems-science/1676631-met.
  • Cited: 0 times

CHECK THESE SAMPLES OF The Stress Strain Curve

I have a very important lab for statics class

k = Y , therefore, Y is the constant of proportionality called Young's modulus which will be given by the slope of the stress-strain curve.... The stress-strain curve for brittle materials are typically linear over their full range of strain, eventually terminating in fracture without appreciable plastic flow.... 17610Pa b) Yield stress is the stress which is required to deform the material it is at that point when a permanent deformation takes place....
6 Pages (1500 words) Lab Report

The Stress-Strain Curve of Polymers under the Effect of Tensile Loading

REPORT Experiment Aim The experiment was conducted with the objective of analyzing the stress-strain curve of polymers under the effect of tensile loading (i.... The stress-strain curve for the specimen is an important method of characterizing the behavior of the material and adjudging its suitability as a material for any function.... The stress-strain curve of a polymer is different from those of other materials.... The critical point in the stress-strain curve is the yield point beyond which the material enters the plastic deformation state....
4 Pages (1000 words) Essay

Engineering material

The reduced gauge ensures that the highest stresses occur within the gauge, and not near the grips of the load frame, preventing strain and fracture of the specimen near or in the grips (Fabila 2010).... This graph is converted into an engineering stress versus engineering strain graph, which is later used to calculate material properties such as yield strength, Young's modulus, ultimate tensile strength, resilience, and toughness of material....
6 Pages (1500 words) Essay

Stress and Strain of Aluminum

The report "Stress and Strain of Aluminum" focuses on the laboratory analysis of the stress and strain of the structure of aluminum molecules.... From the graph, the stress of a material decreases gradually with an increase in strain, this means the material becomes nonlinear as stress is increased.... ield stress is the stress which is required to deform the material, it is at that point when a permanent deformation takes place.... As strain is increased, atoms move to new positions to create a new equilibrium in the material....
5 Pages (1250 words) Lab Report

Measuring Tensile Properties of Metal Specimens

% offset, ultimate strength, rupture strength, and modulus of elasticity were determined from the relevant stress-strain curves obtained from each test.... Load and strain data from the tests were used to determine the material properties of the specimen and results were compared among specimens and to reference values....
11 Pages (2750 words) Essay

Determination of the Tensile Strength of Metals

The paper "Determination of the Tensile Strength of Metals" states that different metals have their tensile strengths varying according to the amount of load they can effectively support per unit area.... Metals with high tensile strengths have various uses in the field of structural engineering....
8 Pages (2000 words) Lab Report

Strain Behavior of Mild Steel and High Yield Steel Bars

The stress-strain curve is linear in the elastic region.... In the stress-strain curve so long as loading of the mild steel is done within the elastic region; the strains are totally recoverable and the sample will return to its original measurements as the load is relaxed to zero.... The paper "Strain Behavior of Mild Steel and High Yield Steel Bars" describes that the modulus of elasticity, obtained from the slope of the linear region of the stress-strain graph, is a property that can be used to characterize the two-sample materials....
5 Pages (1250 words) Lab Report

Mechanical Properties of Materials

This essay "Mechanical Properties of Materials" discusses mechanical properties of materials, methods of determining and evaluating different mechanical properties of materials and the factors affecting the mechanical properties of materials that are fundamental to the success of any engineer.... ...
14 Pages (3500 words) Essay
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us